Where can I get my Flywheel Resurfaced Near Me US?

Last updated on January 13th, 2023 at 08:37 pm

Where can I get my Flywheel Resurfaced Near Me US? Getting your car serviced or repaired at an experienced or professional workshop is of utmost importance. In this article, I will be highlighting the best place where you can get your flywheel resurfaced. With your vehicle in the hands of an experienced mechanic, you are sure to receive premium services.

Related Articles: How to Tell Which Wheel Bearing is Bad Front or Back

Where can I get a flywheel resurfaced near me US?

Only a hand full of auto parts or mechanic stores offer this service. To get your flywheel fixed, you can explore any of the options below;

  • Local Mechanics 
  • O’Reilly Auto Parts
  • AAMCO 
  • Machine Shops near you
  • NAPA

Continue reading to learn more about where to get your flywheel replaced. I will also guide you on how you can carry out some level of maintenance by yourself if you have the chance.

Note: It’s necessary to resurface the flywheel to avoid interfering with other components in your car. Before you install the clutch, it’s a good idea to resurface the flywheel.

To avoid immediate damage to the latter, this is required. Vibrations and chatter are typically signs of wear. In addition, certain indicators indicate that resurfacing is needed.

Road map of this article:

  • Where can I get a flywheel resurfaced near me?
  • Can I resurface my flywheel myself?
  • How do you resurface a flywheel?
  • How much does it cost to have a flywheel resurfaced?
  • Who resurfaces flywheels near me?
  • How long does it take to get a flywheel resurfaced?

Can I resurface my flywheel myself?

Yes, if you have the necessary mechanical knowledge and techniques, you can resurface a flywheel in the comfort of your home. It is recommended, however, that you only remove the flywheel to inspect it for damage.

Then take it to a reputable mechanic to have it properly resurfaced. Your vehicle’s flywheel is an essential component of your car. So only resurface it at home if you are confident in your abilities. You’ll have to pay a mechanic to replace the flywheel if you damage it.

Experienced mechanics are equipped with the necessary tools. A mechanic can also tell you for certain if your flywheel can be resurfaced or if it needs a replacement.

How do you resurface a flywheel?

Put, cutting, or grinding can be used to resurface flywheels.

A brake lathe is typically used to cut. It takes a long time to set up a flywheel on a lathe, and it must be done carefully to ensure that the flywheel turns true on the lathe. Cutting has the disadvantage of leaving uneven areas because a lathe bit tends to skip over hard spots.

Another remedy will involve some metalwork, that is, removing more metal. This might, in turn, affect the height of the clutch. The release bearing may have limited travel on vehicles with hydraulic linkages. If the hydraulic connection is at the end of its limit and too much metal is removed from the flywheel, the clutch may not fully release.

How much does it cost to have a flywheel resurfaced?

The cost of flywheel resurfacing varies by location and vehicle type, but in most cases, the price is around the range of $30-$50. When compared to the cost of purchasing and installing a new flywheel, that’s a bargain.

Note: As a result, resurfacing your flywheel regularly will aid in the smooth operation of your clutching system. It also helps to avoid costly replacements if the flywheel becomes damaged beyond repair.

For example, new flywheels can cost anywhere from $50 to $400. Some, such as dual mass flywheels, maybe even more expensive. It would help if you also accounted for labor costs, which may be in the same ballpark depending on the mechanic’s hourly rates.

Who resurfaces flywheels near me?

You are probably wondering, how do I find quality Flywheel resurfacing near me? In this section, I will be expanding on the locations mentioned earlier in this article to provide more clarity.

1. Local Mechanics 

If auto parts stores are not close to your location, a local mechanic can resurface your flywheel. With a simple Google search, you can locate credible mechanics around your vicinity. 

All you need to do is enter the phrase “local mechanics near me” in the search box. With this, you can access a list of nearby local repair shops, as well as information on the services they provide, contact information, and even directions to their workshop.

2. O’Reilly Auto Parts

If you need your flywheel resurfaced, O’Reilly Auto Parts is a great place to go. This is because the auto shop employs expert technicians who can handle various mechanical issues for their clients.

On the other hand, O’Reilly mechanics will only resurface your flywheel if enough mass is left to cut without bringing it below the manufacturer’s specification. The flywheel must be replaced if this does not occur.


Since 1957, AAMCO has been a leading auto transmission repair franchise. As a result, you’ll have access to transmission repair professionals who can repair your clutch system and resurface your flywheel to keep it in proper working order.

Brake repairs, flywheel resurfacing, air conditioning services, tune-ups, and motorcycle oil changes are available at approximately 260 locations across the country.

Because of their specialized auto services, you can expect to pay more for your flywheel resurfacing at an AAMCO location. However, that’s the advantage of hiring an experienced mechanic.

4. Machine Shops near you

With some research, you will discover that flywheel resurfacing services can also be found at local machine shops. All you need is a quick Google search for “machine shops near me” with this, you will be able to find local service providers that perform flywheels services.

They might have in-house automotive experts who can assist customers with various auto repair services. Nevertheless, several machine shops may lack the necessary skills to work on particular vehicles, so look for credible machine shops that provide high-quality services.


Last but not least is the NAPA store. A nearby NAPA Auto Parts store is another excellent option for flywheel resurfacing. NAPA has experienced mechanics at its AutoCare facility because it is a reputable auto parts retailer.

Even if your flywheel needs to be replaced, you can get it from a local NAPA store and install it at one of their locations. In addition, all kinds of automotive replacement parts and accessories are available at auto parts stores.

How long does it take to get a flywheel resurfaced?

Resurfacing your flywheel can take anywhere between 3-5minutes to be completed. It all depends on the resurfacing method or the mechanic’s expertise in carrying out the procedure.


Keeping your vehicle in its best working condition is very important. With the guidelines I have outlined in this article, you will be able to take care of your flywheel resurfacing issues in no time. Would you like to learn more on this topic? Feel free to drop a comment; I will be glad to provide you with any additional information you need.

what to read next: How to Tell the Difference Between Bad Wheel Bearing & Bad CV Joint

Sharing is caring!

Scroll to Top