Radio code for 2006 Honda Accord List & How to Reset Them?

Last updated on January 13th, 2023 at 08:37 pm

As a vehicle owner, there comes a time when your old battery has to go. When you change the battery, your Honda will ask for a radio code for the first time. After that, the radio will ask for the code every time the battery is unplugged or entirely dead. Radio code for 2006 Honda Accord List & How to Reset Them?

Honda radio codes list

After a great deal of research, I discovered that to obtain the unlock code(s), you will need the VIN of your car. You may hunt for your VIN in a few different locations. To find your VIN, Check any of these places;

• Check the information about vehicle registration
• Proof of insurance in the form of a card or other document
• The base of the front windshield on the driver’s side
• Honda conducts new owner surveys and customer satisfaction surveys.

After you get your VIN, go to this link (https://radio-navicode.honda.com/) to get your code.

In most circumstances, just pressing and holding the power button for 2 seconds will reset the radio and allow it to function normally without the need to enter the code. However, if it doesn’t work, you’ll need to use the Radio Code. Check Emission System Honda Civic 2012 2013, 2014 & 2015

Road map of this article:

• Honda radio codes list
• 2005 honda accord radio code
• 2005 honda accord radio code reset
• How to enter radio code honda accord with navigation
• How to reset Honda radio without code
• How to enter honda accord radio code
• How to enter radio code honda civically
• How do I reset my radio in my Honda Civic

2005 honda accord radio code

You may locate your Honda Accord radio code via various methods: The code can be found in your glove box or your owner’s handbook.

This should be written on a label next to the serial number of the radio. Then, please have one of our certified professionals discover the code for you at Westbrook Honda’s Service Center.

To get a comprehensive video guide, feel free to watch this video guide on youtube. It contains all the details you need to know. Link: .

2005 honda accord radio code reset

In most circumstances, resetting your 2005 Honda accord radio is as simple as tapping a few buttons. Still, in rare cases, you may need to input a security code to restore radio functionality.

To start and complete the following steps;

• Turn the ignition key to “On,” but do not start the car.
• Press down on the volume control knob to turn on the radio. Turn the clock back 10 seconds.
• Watch the radio display while pressing and holding the power button for two to five seconds.
• Turn on the radio while pressing and holding the Nos. 1 and 6 radio preset buttons. The presentation is outstanding.
• Click on the “Get codes” at this link https://radio-navicode.honda.com/.
• Turn on the radio by turning the ignition switch to “On.” Enter the code.

How to enter radio code honda accord with navigation

• Once you’ve got the serial number from your radio, you’ll need a pen and paper or a device to write it down.
• Turn the ignition switch or press the start button to place the car in the auxiliary position.
• Make sure the radio is turned off.
• Press and hold the radio buttons one and six together with one hand.
• Turn the radio on with your free hand while holding buttons 1 and 6.
• An 8-digit serial number will appear when the buttons are held.
• Release buttons 1 & 6 and write down or record the eight-digit serial number later once that serial number is displayed.
• Go to the car after getting the 5-digit radio code from your local Honda dealer.
• Set the car in the secondary position by turning the ignition switch or pressing the start button.
• Switch on the radio. The word “code” will appear on the radio. Restart the radio and search for the phrase “code.” Enter the 5-digit radio code in the box below. The radio should be turned on again.

Note: Your local Honda dealer will also require the seventeen-digit vehicle identification number to access, recover, and deliver your radio code to you. Then, using the 17-digit vehicle identification number and the 8-digit radio serial number, contact your local Honda dealer.

How to reset Honda radio without code

If you are finding it difficult to get your radio code, there is no need to get worried. In this section, we will show you a simple hack to get things resolved in no time. To reset the Honda radio without a code, you can follow these simple steps;

• Switch the ignition to the ON position to circumvent the radio security codes on these cars.
• Check to check whether CODE appears on your audio system. If this is the case, disable it.
• Next, all you have to do is press and hold the power button on the radio.
• It takes around 40-50 minutes to hold it. Your automobile audio system will pop up and bypass the code during this time period.

How to enter honda accord radio code                 

Enter your Honda Accord radio code using the radio preset buttons once you’ve found it. If the code for your Honda Accord audio system is “25589,” for example, you would press “2” twice, “5” twice, “8” once, and “9” once. This will unlock and reset the audio system in your vehicle.

How to enter radio code honda civically

It’s straightforward to restore your Honda Civic radio functions after you’ve found your code. Simply use the radio preset buttons on your Civic to input the code. For example, if the radio code on your Honda Civic is “25589,” you would hit “2” twice, “5” twice, “8” once, and “9” once. When you enter the code, your system should open and you should have immediate access to the radio capabilities on your Honda Civic.

Sharing is caring!